Loading...
34
CASTING ASSEMBLY
WARNING
!
REGARDING IMPROPER ASSEMBLY OF HOSE
ON PROPANE AND NATURAL GAS FG/FGQ650 MODELS
DURING THE ASSEMBLY PROCESS OF THE BASE ASSEMBLY STEP, THE CUSTOMER
NEEDS TO ENSURE THAT THE HOSE IS UNTIED FROM BURNER BEFORE FINAL
ASSEMBLY. CUSTOMER SHOULD RELEASE THE TIE AND PASS THE HOSE THROUGH
THE GAP BETWEEN HEAT SHIELD AND FRONT PANEL BEFORE ASSEMBLING THE FIREBOX
(BASE) TO THE CART (CABINET). NATURAL GAS (NG) HOSE MUST PASS THROUGH
THE GAP AND THAT IS DIRECTED TO THE BOTTOM OF CABINET. PROPANE
HOSE/REGULATOR SHOULD ALSO DIRECTED THROUGH THE GAP TO THE CYLINDER
UNDERNEATH THE HEAT SHIELD.
PROPANE
HOSE WITH
REGULATOR
NATURAL GAS (NG)
HOSE WITH
ADAPTOR
Your barbeque will come equipped with one
or the other, a propane hose with regulator,
or NG hose with adaptor as shown. Hose
type depends on model purchased.
NOTE: THIS BARBEQUE IS NOT DUAL FUEL,
THE GAS TYPE AND HOSE ASSEMBLY
DEPENDS ON THE MODEL PURCHASED.
IMPORTANT
!
IF HOSE IS TIED TO BURNER OR
BASE, FIRST REMOVE THE
TIE AND PACKAGING AND THEN
ASSEMBLE THE GRILL TO BASE
AS SHOWN
PROPANE MODEL NG MODEL
FIG.10
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com