Loading...
51
Maintenance
8. Use the handle to slowly pull the lamp out of the
projector.
Pulling it too quickly may cause the lamp to break and
scatter broken glass in the projector.
Do not place the lamp in locations where water might
splash on it, children can reach it, or near flammable
materials.
Do not insert your hands into the projector after the lamp
is removed. If you touch the optical components inside, it
could cause color unevenness and distortion of the
projected images.
9. As shown in the illustration, lower the new lamp.
10. Reconnect the lamp connector.
11. Tighten the screw that secures the lamp.
12. Ensure the handle is fully laid flat and locked in place.
Loose screws may cause a bad connection, which could
result in malfunction.
Do not over tighten the screw.
13. Replace the lamp cover on the projector.
14. Tighten the screws that secure the lamp cover.
Loose screws may cause a bad connection, which could
result in malfunction.
Do not over tighten the screw.
21
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com