Loading...
29
Menu Functions
Volume
Adjusts the volume level of the projector's internal speaker or the volume being
output from the audio output jack.
If the Mute function is activated, adjusting Volume will turn off the Mute
function.
The function is accessible through the remote control.
Mute
Select On to temporarily turn off the projector's internal speaker or the volume being
output from the audio output jack.
To restore the audio, select Off.
The function is accessible through the remote control.
Fast Mode
Reduces frame delay. The lag between the signal input and output will be minimized to
the lowest level.
Select an HDMI signal at 1080p/60Hz to use this function. Aspect Ratio will be
set to Auto, and Overscan Adjustment will be set to 0 during operation.
3D Mode
This projector supports playing three-dimensional (3D) content transferred through
your 3D-compatible video devices and contents, such as PlayStation consoles (with
3D game discs), 3D Blu-ray players (with 3D Blu-ray discs), 3D TV (with 3D channel),
and so on. After you have connected the 3D video devices to the projector, wear the
BenQ 3D glasses and make sure the power is on to view 3D contents.
When watching 3D contents,
• the image may seem misplaced, however, this is not a product malfunction.
• take appropriate breaks when watching 3D content.
• stop watching 3D content if you feel fatigue or discomfort.
• keep a distance from the screen of about three times the effective height of
the screen.
• children and people with a history of oversensitivity to light, heart problems,
or any other existing medical condition should be refrained from watching 3D
contents.
The default setting is Auto and the projector automatically chooses an appropriate
3D format when detecting 3D contents. If the projector cannot recognize the 3D
format, manually choose a 3D mode according to your preference.
When this function is enabled:
• The brightness level of the projected image decreases.
• The Picture Mode cannot be adjusted.
• The Vertical Keystone can only be adjusted within limited degrees.
The function is accessible through the remote control.
3D Sync Invert
When your 3D image is distorted, enable this function to switch between the image
for the left eye and the right eye for comfortable 3D viewing experience.
The function is accessible through the remote control.
Settings
Press OK to enter its submenu.
Press BACK to save your changes and exit.
See below for more details.
Wall Color
Enable this function to help correct the projected picture’s color when the projection
surface is not white. You may choose a color similar to that of the projection surface
from these options: Light Yellow, Pink, Light Green, or Blue.
Projector
Position
The projector can be installed on a ceiling or behind a screen, or with one or more
mirrors. See Choosing a location for details.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com