Loading...
18
(8) Connect the regulator to the
cylinder, Connect the gas lead
 
8-12 l/min
Installation set up for DC TIG Welding with KUMJR200AC/DC
(1) Turn on the machine using the ON/OFF switch
(2) Select the TIG function with the TIG/MMA selector switch.
(3) Select DC using the AC/DC selector switch.
(4) Connect the Tig Torch connector to the negative terminal and tighten it.
(5) Connect the Earth Cable connector into the positive terminal and tighten it.
(6) Connect the torch switch remote lead into the torch remote socket
(4) Insert the torch gas connector into the quick lock gas receptacle.
(4) Connect gas line to Gas Regulator and connect the gas regulator to the Gas Cylinder.
(1) Turn on the machine using the
ON/OFF switch
(2) Select TIG using the
TIG/MMA selector switch
(3) Select DC using the
AC/DC selector switch
(4) Connect the TIG torch connector
to the terminal.
(5) Connect the Earth cable
connector to the terminal
(6) Connect the torch switch lead
to the torch remote receptacle
(7) Insert the torch gas connector into
the quick lock gas receptacle.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com