Loading...
15
3) Set the welding current using the
amperage control dial
continued set up and operation for MMA (Stick) Welding
(3) Set the welding current relevant to the electrode type and size being used as recommended by the
electrode manufacturer
(4) Place the electrode into the electrode holder and clamp tight
(5) Strike the electrode against the workpiece to create and arc and hold the electrode steady to maintain
the arc
(6) Hold the electrode slightly above the work piece to maintain the arc while travelling at an even speed
to create and even weld deposition
(7) 
(8) Wait for the weld to cool and carefully chip away the slag to reveal the weld metal underneath
(6) Hold the electrode slightly above the work
maintaining the arc while travelling at an even
speed.
(4) Place the electrode into the electrode
holder and clamp tight.
(7) 
snapping the electrode away from the work
piece.
(5) Strike the electrode against the workpiece
to create an arc and hold the electrode steady
to maintain the arc
(8) Wait for the weld to cool and carefully chip
away the slag to reveal the weld metal below.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com