Basic MIG Welding .
wire pointed ahead of bead wire pointed back into bead
travel direction travel direction travel direction
(A) Push Technique (B) Gun Perpendicular (C) Drag Technique
(stick out), travel speed, thickness of base metal, wire feed speed (amperage) and arc voltage.
To follow are some basic guides to assist with your setup.
Gun Position - Travel Direction, Work Angle
Gun position or technique usually refers to how the wire is directed at the base metal, the angle
and travel direction chosen. Travel speed and work angle will determine the characteristic of the
Push Technique - The wire is located at the leading edge of the weld pool and pushed towards
the un-melted work surface. This technique offers a better view of the weld joint and direction of
the wire into the weld joint. Push technique directs the heat away from the weld puddle allowing
Perpendicular Technique - The wire is fed directly into the weld, this technique is used prima-
higher and a deeper penetration is achieved.
Drag Technique - The gun and wire is dragged away from the weld bead. The arc and heat is
concentrated on the weld pool, the base metal receives more heat, deeper melting, more penetra-
Instructions Manual for R AZOR WE LD 175 DC (K019D)