Loading...
12
Down Slope Time: Select by pushing selector key to cycle
through to illuminate the Down Slope icon.
Front Panel Operation - Weld Program Sequence Control
Finish
Current
Start
Current
Peak
Current
Base
Current
AC Balance AC Hz % Pulse Pulse Hz
ADJUSTMENT
Base Current - Provides selection for the Base Amperage during the Pulse Welding cycle.
Turn the Encoder to set
the Base Current value
DC Range 10~320
AC Range 20~320
Base Amp: Select by pushing selector key to cycle through to
illuminate the Base Current icon.
The value selected shows on the
digital display. It is the set value of
amperage the machine will deliver
during the Base Amp period of the
pulse cycle.
Finish
Current
Start
Current
Peak
Current
Base
Current
AC Balance AC Hz % Pulse Pulse Hz
ADJUSTMENT
Peak Current - Provides selection for the Maximum Welding Current (Amps) required during welding.
Turn the Encoder to set
the Peak Current value
DC Range 10~320
AC Range 20~320
Peak Current: Select by pushing selector key to cycle through to
illuminate the Peak Current icon.
The value selected shows on the
digital display. It is the maximum set
value of amperage the machine will
deliver..
Finish
Current
Start
Current
Peak
Current
Base
Current
AC Balance AC Hz % Pulse Pulse Hz
ADJUSTMENT
Down Slope Time - Sets the transition time from Start Amperage to Welding Amperage
Turn the Encoder to set
the Down Slope Time
(Range is 0~60 Sec)
The value selected shows on the
digital display. It is the amount of
time it takes for the welding amper-
age to drop down to the set Finish
Amperage.
Finish
Current
Start
Current
Peak
Current
Base
Current
AC Balance AC Hz % Pulse Pulse Hz
ADJUSTMENT
Finish Current - Provides selection for the amount of amps required at the end of the weld.
Turn the Encoder to set
the Finish Amp value
DC Range 10~320
AC Range 20~250
Finish Amp: Select by pushing selector key to cycle through to
illuminate the Finish Amp icon.
The value selected shows on the
digital display. It is the amount of
amps the machine will deliver at the

Razorweld
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com