Loading...
31
Razor2OOAC/DC TIG-ARC
Razorweld
Remote Amperage Control Operation Procedure
amperage
adjustment
on/o switch
Type: UER1MS-10H
Connection and operation of
the remote hand control
1. Connect the remote control 5 pin
plug from the TIG Torch switch lead
to the 5 pin remote receptacle on the
front panel of the machine.
3. Activate the remote control.
Press and hold the torch switch for 5 second
until the machine beeps to indicate the
remote function has activated. Repeat the
procedure to de-activate the remote control.
(4) The thermal LED will illuminate Green to
indicate the machine is in remote control
mode. Note: The machine will default to non-
remote mode when switched o.
5. Rotate the Remote Control Knob to adjust
the amperage output of the machine. The
remote can be used static or during welding to
adjust the amps up or down.
6. The amps set by the remote control
will show in the Digital Display of the
machine.
2. Select 4T trigger function by pushing
the button to cycle through until
the 4T icon illuminates as the chosen
option.
1. Connect the remote control 5 pin
plug from the Tig Torch switch lead
to the 5 pin remote receptacle on the
front panel of the machine.
Connection and operation of
the remote foot control
Type: RWJFC-2D
Type: ER1MS-10
amperage
adjustment on/o switch
Remote amperage controls allow remote welding current adjustment from the welding machine during welding.
2. Select 2T trigger function by pushing
the button to cycle through until the 2T icon
illuminates
3. Activate by holding down the foot pedal for 5
seconds, the remote icon will illuminate. Up &
down travel of the foot pedal will adjust the weld-
ing amperage during welding. Note spot function
does NOT work when power source is in remote!
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com