Loading...
30
Razor2OOAC/DC TIG-ARC
Razorweld
Set up and operation for AC PULSE TIG Welding
The Razorweld 200ACDC machine has digital Pulse Frequency Control. All the parameters for AC Pulse
TIG welding - Peak Amp, Base Amp, Pulse Frequency and Pulse Width are easy to set via the digital con-
trol panel.
EXAMPLE OF PULSE AC TIG WELDING - SETUP PARAMETERS:
Material = Aluminum x 3/32" / Tungsten Electrode = 0.09 Zirconiated / Gas = Argon
The following steps are a guide as a starting point for you to set the machine up in Pulse mode to give an
example of welding in Pulse mode function. You can experiment by changing any of the variables to see
what eect it has over the welding and what the end result can be, but it is suggested to change only one
variable at a time and then check the welding to see what the result is, in this way you acquire a better un-
derstanding of how each variable aects the welding current.
1. Select AC Pulse by pushing
selector button to cycle through to
illuminate AC Pulse icon.
2. Select Peak Amp by pressing the encoder
knob to cycle through to illuminate the Peak
Amp Icon
3. Rotate the Encoder Knob to set the Peak Amp
at 150A, it will show in the digital display.
(Range is 5-200 Amps)
4. Select the Base Amp by pushing the
encoder knob to cycle through to illuminate
the Base Amp Icon
5. Rotate the Encoder Knob to set the Base Amp
at 60A - (Range is 5-200 Amps)
6. Select the Pulse Frequency by pushing the
encoder knob to cycle through to illuminate the
Pulse Hz Icon
7. Rotate the Adjustment Encoder Knob to set the
Pulse Frequency to 2 Hz - (0.5 - 200Hz)
9. Rotate the Adjustment Encoder Knob to set the
Pulse Width at 60% - (Range is 10 - 90%).
8. Select the Pulse Width (on time of the
Peak Amp) by pushing the selector button to
cycle through to illuminate the % Pulse Icon
AC Pulse Welding Set Up Procedure
150A
60A
Peak
Amp
Base
Amp
150A
60A
Peak
Amp
Base
Amp
150A
60%
30A
40%
Peak Amp
On Time
Pulse Width
Peak
Amp
Base
Amp
150A
30A
150A
30A
Time = 1 Second (Hz)
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com