Loading...
13
Razor2OOAC/DC TIG-ARC
Razorweld
Continued - Weld Program Selection & Setting
Parameter selection: Select by pushing the Encoder Knob
repeatedly to cycle through the weld parameter icons. The
icon will illuminate when selected.
Each push of the encoder knob will move the icon illumina-
tion in a clockwise cycle.
Shows selected icon
4B Weld Program - Selection of further weld program parameters
Turn the Encoder to set
the AC Balance value
Range is (-15 to -50)
Start Amp: Select by pushing the encoder to cycle
through to illuminate the AC Balance icon.
The value selected shown on the digital
display represents a more penetrating arc
set at -15, a balanced arc at 0, or a more
oxide cleaning action arc at -50
AC Balance - Provides selection to adjust the balance of the AC wave form in AC TIG mode. Allows adjustment of
the arc to be balanced, penetrating or oxide cleaning during AC TIG welding.
Turn the Encoder to
adjust the AC Hz
(Range is 20-250Hz)
AC Hz: Select by pushing the encoder to
cycle through to illuminate the AC Hz icon.
The value selected shown on the digital
display represents the number of times
per second that the AC square wave
transitions from + to - cycle.
AC Hz - Provides selection to adjust the frequency of the AC square wave in AC TIG mode. Allows adjustment of
frequency of the AC square wave cycle (transistion from + to -) during AC TIG welding.
Turn the Encoder to
adjust the Pulse Hz
(Range is 0.02 - 200Hz)
Pulse Hz: Select by pushing the encoder
to cycle through to illuminate the Pulse Hz
icon.
The value selected shown on the digital
display represents the number of times
per second that the output welding current
switches from Peak Amp to Base Amp
Pulse Hz - Provides selection of the pulse frequency of the welding output current. Allows adjustment of frequency
that the output current transistions from Peak Amp to Base Amp.
Turn the Encoder to
adjust the % Pulse
(Range is 10-90%)
% Pulse: Select by pushing the encoder
to cycle through to illuminate the Pulse
Hz icon. Push the encoder a 2nd time to
access % Pulse adjustment mode
The value selected shown on the digital
display represents the % of time that the
Peak Amp is on during the pulse cycle.
% Pulse - Provides selection of the on time ratio of the Peak Amp during the pulse welding cycle (Pulse Width).
Allows adjustment of the % of time that the Peak Amp is on during each pulse cycle.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com