Loading...
Connection 19
Connecting Video source devices
You can connect your projector to various Video source devices that provide any one of the
following output sockets:
•HDMI
Component Video
•S-Video
•Video (composite)
You need only connect the projector to a Video source device using just one of the above
connecting methods, however each provides a different level of video quality. The method
you choose will most likely depend upon the availability of matching terminals on both the
projector and the Video source device as described below:
Best video quality
The best available video connection method is HDMI. HDMI (High-Definition Multimedia
Interface) supports uncompressed video data transmission between compatible devices like
DTV tuners, DVD players and displays over a single cable. It provides pure digital viewing
experience.
See "Connecting an HDMI device" on page 20 for how to connect the projector to a HDMI
device.
If no HDMI source is available, the next best available video connection method is
Component Video (not to be confused with composite Video). Digital TV tuner and DVD
players output Component Video natively, so if available on your devices, this should be
your connection method of choice in preference to (composite) Video.
See "Connecting a Component Video source device" on page 21 for how to connect the
projector to a component video device.
Better video quality
The S-Video method provides a better quality analog video than standard composite Video.
If you have both composite Video and S-Video output terminals on your Video source
device, you should elect to use the S-Video option.
See "Connecting an S-Video source device" on page 22 for how to connect the projector to
an S-Video device.
Least video quality
Composite Video is an analog video and will result in a perfectly acceptable, but less than
optimal result from your projector, being the least video quality of the available methods
described here.
See "Connecting a composite Video source device" on page 23 for how to connect the
projector to a composite Video device.
Connecting audio
The projector has a built-in mono speaker which is designed to provide basic audio
functionality accompanying data presentations for business purposes only. It is not designed
for, nor intended for stereo audio reproduction use as might be expected in home theater or
home cinema applications. Any stereo audio input (if provided), is mixed into a common
mono audio output through the projector speaker.
Loading...
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com