4. If you are prompted to enter the password, use the arrow keys on the projector or remote control
to enter a six-digit password. See Utilizing the password function for details.
5. Switch on the connected equipment.
6. The projector starts to search for available input signals. The current input signal being scanned is
displayed on the screen. If the projector does not detect a valid signal, the "No Signal" message
appears. You may press SOURCE on the projector or remote control to select your desired input
7. If the horizontal frequency of the input source exceeds the range of the projector, the "N o Signal"
message is displayed on the screen. It will remain on-screen until you change the horizontal frequency
of the input source to an appropriate one.
Specify Keyst one.
For more information about keystone,
see Correcting keystone.
Specify Auto Source.
Select O n if you want the projector to
always search for available signals
automatically when the projector is
Specify Menu Type.
For more information about menu
types, see About the OSD Menus.
N ow you’ve completed the initial setup.