MMA (Manual Metal Arc) Welding
One of the most common types of arc welding is manual metal arc welding (MMA) or stick welding. An electric cur-
gaseous vapours that serve as a shielding gas and providing a layer of slag, both of which protect the weld area from
covering over the weld metal must be chipped away after welding.
Arc with core wire melt
Flux residue forms slag cover
• The arc is initiated by momentarily touching the electrode to the base metal.
• The heat of the arc melts the surface of the base metal to form a molten pool
at the end of the electrode.
• The melted electrode metal is transferred across the arc into the molten pool
and becomes the deposited weld metal.
• The deposit is covered and protected by a slag which comes from the
• The arc and the immediate area are enveloped by an atmosphere of
a series of letters and numbers. The letters and numbers identify the metal
alloy and the intended use of the electrode.
The Metal Wire Core works as conductor of the current that maintains the arc.
The core wire melts and is deposited into the welding pool.
The covering on a shielded metal arc welding electrode is called Flux.
● producing a protective gas around the weld area
●creating a protective slag coating over the weld as it cools
●establishing arc characteristics
●adding alloying elements.
the molten pool. These additional functions are provided mainly by the cover-
ing on the electrode.
Instructions Manual for VIPE R 182 (K019E )