> > > > >
> > > >
>
12
AB
> > >
+
0 1 2 3 4 5 6 7 8 9
5
OVERVIEW OF SETTINGS
Back
More
RAD: IMMUNITY
RAD: DIRECTION
RAD: HOLDTIME
RAD: OUTPUT
IR: WIDTH
IR: NUMBER
IR: PRESENCE TIME
IR: OUTPUT
REDIRECTION
FACTORY RESET
More
Back
Back
More
PRESETTINGS
RAD: FIELDSIZE
IR: IMMUNITY
IR: FREQUENCY
More
Back
ZIP CODE all parameter settings in zipped format
(see application note on ZIP CODE)
ID # unique ID-number
ERROR LOG last 10 errors + day indication
IR: SPOTVIEW view of spot(s) that trigger detection
IR: C1 ENERG signal amplitude received on curtain 1
IR: C2 ENERG signal amplitude received on curtain 2
POWERSUPPLY supply voltage at power connector
OPERATINGTIME power duration since first startup
RESET LOG delete all saved errors
PASSWORD LCD and remotre control password
(0000= no password)
LANGUAGE language of LCD-menu
ADMIN enter code to access admin mode
standard critical
env.
shopping
street
For conformity to EN 16005 or DIN 18650 at a
mounting height of 2.8 or more, use values 6 and 7.
For conformity to BS 7036 at a mounting height
of 2.2 m or more, use values 6 and 7.
Sensors mounted close to each other should
have a different frequency.
increased immunities, 1 curtain
increased immunities, redirection = motion and presence
factory values for radar immunity, IR immunity, IR number and redirection
small large
bi uni uni
AWAY
low
0.5 s 1 s 2 s 3 s 4 s 5 s 6 s 7 s 8 s 9 s
uni
PRM
bi
auto
uni
auto
PRM
auto
PRM: for persons with reduced mobility
AWAY: unidirectional motion away from sensor
auto: automatic adaptation of field size (small shops)
service
mode
motion 15 s 30 s 1 min 2 min 5 min 10 min
motion motion
or
presence
motion
and
presence
opening output is active in case of: 0 motion detection
1 motion or presence detection
2 motion and presence detection
20 min 60 min infinite
service mode = no IR detection during 15 minutes (maintenance).
This value excludes conformity of the door system to EN 16005 and DIN 18650.
high
min. value for DIN18650: 1 min
min. value for EN16005: 30 s
BASICADVANCED
DIAGNOSTICS
NO: normally open
NC: normally closed
Always additionally adjust
the arrow position on the
sensor with a screwdriver.
excludes conformity of the door system
according to EN 16005 / DIN 18650 / BS 7036
NO
NC NC
NC
NC
NO
NO
NO
NO
NC
NC
NC
NC
NO
NO
NO NO: normally open
NC: normally closed
low normal high
normal high higher highest
< 2.8 m > 2.8 m
full
reset
partial
reset
partial: outputs are
not reset
factory value
radar
off
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com