Selects a baud rate that is identical with your computer’s so that you can
connect the projector using a suitable RS-232 cable and update or
download the projector’s firmware. This function is intended for
qualified service personnel.
Test Pattern Selecting On enables the function and the projector displays the grid test
pattern. It helps you adjust the image size and focus and check that the
projected image is free from distortion.
Closed Caption Enable
Activates the function by selecting On when the selected input signal
carries closed captions.
• Captions: An on-screen display of the dialogue, narration, and
sound effects of TV programs and videos that are closed captioned
(usually marked as "CC" in TV listings).
Set your screen aspect ratio to 4:3. This function is not available
when the aspect ratio is “16:9” or “Real”.
Selects a preferred closed captioning mode. To view captions, select
CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary language
in your area).
Selecting On enables the function. The projector is able to provide the
network function when it is in standby mode.
Selecting On enables the function. The projector can output the
microphone signal when it is in standby mode and all the necessary
equipment is correctly connected. See "Playing sound through the
projector" on page 18 for details.
Selecting On enables the function. The projector can output a VGA
signal when it is in standby mode and the COMPUTER 1 jack is
correctly connected to devices. See "Connection" on page 16 for how to
make the connection.
Enabling this function slightly increases the standby power
See "Controlling the projector through a LAN environment" on page 36
Returns all settings to the factory preset values.
The following settings will still remain: Phase, H. Size, User 1, User
2, Language, Projector Position, High Altitude Mode, Security
Settings, Remote Receiver, DHCP, SSID, Remote Desktop and Baud
5. SYSTEM SETUP: Advanced menu