15 | P a g e
Note: Depending on use, it is recommended that the air conditioner be cleaned internally annually.
Please contact Whynter at support@whynter.com for internal maintenance cleaning instructions.
15 | P a g e
CARE AND MAINTENANCE
IMPORTANT:
Switch off the air conditioner and disconnect the plug from the power outlet
Drain al collected condensation from the upper and lower drain ports.
Only transport the air conditioner in an upright position.
CLEANING THE PRE-FILTER
This unit includes two air filters; a washable pre-filter and an activated carbon filter.
To ensure the air intake is filtered properly and to assure that your air conditioner runs efficiently, it is
recommended that the pre-filter is washed at least once every two weeks depending on use.
1. Switch off the air conditioner.
2. Pull the pre-filter frame from the unit.
3. Remove the activated carbon filter from the pre-filter.
4. Use a vacuum cleaner or tap lightly to remove loose dust and dirt from the pre-filter.
5. Rinse the pre-filter thoroughly under warm running water (no hotter than 100F.)
6. Dry thoroughly before re-inserting the filters.
NOTE: The activated carbon filter and 3M™ Antimicrobial Filter (sold separately) are not washable.
They are optional filters and should be replaced every 2-3 months or as needed if used.
Please contact support@whynter.com for retail sales information or visit whynter.com for a list of
optional accessories
WARNING! Never operate the air conditioner without the pre-filter in place
CLEANING THE AIR CONDITIONER
Always switch off the air conditioner and disconnect the plug from the power supply outlet
before cleaning the air conditioner.
Use a soft damp cloth to wipe the body of the unit.
Never use harsh chemicals, oil-based products, detergents, chemically treated cloths or
other cleaning solutions. These could possibly damage the body of the air conditioner.
Switch off the air conditioner and disconnect the power plug from the power supply outlet before
cleaning the air conditioner.
Clean the pre-filter.
Drain the condensed water completely.
On a warm day, set the unit to Fan only mode for half a day to dry the unit internally.
Gather the power cord and bundle it.
Remove the batteries from the remote.
If leaving the window kit in place, disconnect the exhaust and intake hose from the window
slider kit and place the included covers on the fixtures. Otherwise, remove the window kit from
the window opening. To remove the hose connectors from the fixtures on the window kit, slightly
turn, push and gently pull the connector to release.
Place the storage cover over the air conditioner.
END OF SEASON STORAGE
This portable air conditioner comes with one end of season storage cover. We highly recommend
that storage cover bag is utilized when the unit is not going to be used for a period of time.
WARNING: To avoid danger of suffocation, keep this bag away from babies and children.
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com