5|P a g e
Do not allow children to climb, stand or hang on the appliance. The air conditioner could tip
over and get damaged and/or seriously injure somebody
Keep fingers out of the air intakes and air outlets
The appliance is an electrical appliance. To avoid injury from electrical shock do not operate it
with wet hands, while standing on a wet surface or while standing in water. Do not use it in
outdoors or in wet conditions
When positioning or moving the appliance, ensure it is not turned upside down or greater
than 45° or more off level
This appliance is designed for household, non-commercial use only. Any other use will void
the warranty
Do not plug into the power outlet before set up is completed
Do not operate this unit without the air filter(s)
Do not use harsh chemicals to clean the filter(s). Dry thoroughly before inserting the filter(s) into
the unit
Do not add extra length to the exhaust hose by more than a total length of 9’. This will
reduce the cooling efficiency of the portable air conditioner
At the end of each season, all water must be drained from the unit and filter(s) must be
cleaned before storage
COOL Higher than 62°F / 17°C
DRY Higher than 54°F / 13°C
Your portable air conditioner is supplied with a Leakage-Current
Detection and Interruption (LCDI) plug. This plug reduces the risk of
fire due to arcing faults in the power supply cord. Please follow the
instructions below to ensure that LCDI plug works properly.
1. Plug the power cord to a grounded wall outlet. Do not plug to
a power strip or extension cord.
2. Press the TEST button on the plug. This should trip the plug
and cut the power to the air conditioner. If the plug does not
trip and the unit comes on, please contact technical support.
3. Press the RESET button to start the air conditioner.
4. Do NOT use the TEST and RESET buttons to turn the air
conditioner on and off.
Terms of Use | Privacy Policy | DMCA Policy
2006-2020 Rsmanuals.com